Full Synthetic Heavy Duty Diesel Engine Oil

Heavy Duty Engine Oil

MAG 1 Full Synthetic Heavy Duty Diesel Engine Oil is designed to provide the highest levels of protection and performance from our most advanced technology and formulations.

Protection for Today’s Engine Designs

As today’s engines are evolving and heavy duty engine manufacturers are recommending thinner, lighter oils, MAG 1® has evolved right along with them. Only the most advanced engine oils meet the difficult challenges of effectively balancing durability, extending drain intervals and protecting emissions control devices. 

Unsurpassed Protection, Even in the Lightest Viscosity

MAG 1® with FMX® Technology provides unsurpassed protection in every viscosity. Even our lowest viscosity oils protect better than thick oils of the past. FMX Technology creates a strong, durable and high-performing level of protection that controls friction and reduces metal-to-metal contact. 

Our advanced oil technology actually improves oil properties over time, retaining viscosity, friction and anti-wear benefits, in spite of severe engine temperatures. MAG 1 also delivers greater horsepower and improved fuel economy.

Full Synthetic Heavy Duty Diesel Engine Oil featuring FMX® Technology and Evolutionary Performance™ 

MAG 1® Full Synthetic Heavy Duty Diesel Engine Oil is specially engineered and formulated to provide:

Performance

  • Unsurpassed protection for extended drain intervals.
  • Up to 1.6% improved fuel mileage.¹ 

Strength

  • Up to 53% better wear protection.    

Learn More 

Durability

  • Up to 83% better oxidation control.² 
  • Up to 63% better deposit control.²

Learn More 

¹ Using HD 10W-30 CK-4, compared to Conventional HD 15W-40 CK-4 during on-highway long-haul service. Savings will vary on idle time and other driving conditions of your fleet or vehicle.

 Compared to new limits of API CK-4 requirements. 

Typical Properties

Viscosity Grade Full Syn 5W-40 CK-4 Full Syn 0W-40 CK-4
Calcium, wt. % ASTM D5185 0.082 0.105
Cold Cranking Simulator at (°C), cP ASTM D5293 6535 (-30) 6530 (-30)
Color ASTM D1500 2.5 3
Flash Point °C ASTM D92 225 225
Flash Point °F ASTM D92 437 437
Gravity, °API ASTM D287 33.57 35.44
High Temperature / High Shear Vis at 150°C, cP ASTM D5481 3.5 3.5
Magnesium, wt. % ASTM D5185 0.116 0.1
Molybdenum, wt. % ASTM D5185 0.007 0.0066
Nitrogen, wt. % ASTM D4629 0.124 0.105
Noack Volatility, % loss ASTM D6375 12 12
Phosphorus, wt. % ASTM D5185 0.115 0.115
Pour Point °C (°F) ASTM D5950 -45°C (-49°F) -51°C (-60°F)
Pumping Viscosity at (°C), cP ASTM D4684 24,113 (-35) 21,600 (-25)
Specific Gravity @ 60°F (15.6°C) ASTM D4052 0.8572 0.8476
Sulfated Ash, wt. % ASTM D874 0.99 0.99
Sulfur, wt. % ASTM D4951 0.314 0.32
TBN, mgKOH/g ASTM D2896 10 10
Viscosity @ 100°C cSt ASTM D445 14.76 14.92
Viscosity @ 40°C cSt ASTM D445 87.75 87.21
Viscosity Index ASTM D2270 177 180
Zinc, wt. % ASTM D5185 0.127 0.127

Industry/OEM Approvals

Title Full Syn 5W-40 CK-4 Full Syn 0W-40 CK-4
ACEA E9, E7, E4, E2 Meets Requirements -
Allison C-4 Suitable for Use -
API CI-4 Plus, CI-4, CH-4, CG-4, CF-2, CF Meets Requirements Recommended For
API CJ-4 Meets Requirements Recommended For
API CK-4 Approved Recommended For
API SJ, SH, SG, SF Meets Requirements -
API SL Meets Requirements Recommended For
API SM Meets Requirements Recommended For
API SN Approved Recommended For
CAT ECF-3, ECF-2, ECF-1-a Meets Requirements Recommended For
Chrysler/Fiat MS-10902 Meets Requirements Recommended For
CID A-A-52306, MIL-PRF-2104G Meets Requirements -
Cummins 20086 Meets Requirements Recommended For
Cummins CES 20081, 20077, 20076 Meets Requirements Recommended For
Detroit Diesel 93K218, 93K215, 93K214 Meets Requirements Recommended For
Detroit Diesel 93K222 Meets Requirements Recommended For
Ford WSS-M2C171-E Meets Requirements Recommended For
Ford WSS-M2C171-F1 Approved Recommended For
Global DHD-1 Meets Requirements Recommended For
JASO DH-2 Meets Requirements Recommended For
Mack EO-O Premium Plus, EO-N Premium Plus 03, EO-M Plus, and prior Meets Requirements Recommended For
Mack EOS-4.5 Meets Requirements Meets Requirements
MAN 3275, 270 Meets Requirements Recommended For
MAN 3575 Meets Requirements Recommended For
MB 228.3, 228.31 Meets Requirements Recommended For
MTU 2.1 Meets Requirements Recommended For
MTU Type I, Type II Meets Requirements Recommended For
Renault RLD-4 Meets Requirements Recommended For
Volvo VDS-4, 3, 2 Meets Requirements Recommended For
Volvo VDS-4.5 Meets Requirements Recommended For