Mag1
MAG 1® DOT3 Brake Fluid
Brake Fluid Vehicle Maintenance and Performance Fluids
Featuring FMX® Technology that provides unsurpassed protection and performance.
Specially blended formula that meets or exceeds the highest standards of performance and safety for a DOT 3 fluid. For all disc and drum brake systems, including ABS, in which a DOT 3 fluid is recommended. Complies with Federal Motor Vehicle Safety Standard 116. Surpasses SAE Spec. J1703. Minimum Wet Boiling Point 284°F (140°C).
Evolutionary Performance™
OEMs continue to evolve engine and vehicle systems. One brand has evolved right alongside – MAG 1®. Only the most advanced automotive fluids meet the difficult challenges of effectively balancing performance, strength and durability.
Powerful Chemistry and Performance
MAG 1® helps improve your vehicle’s longevity and performance.
Typical Properties
| Chemical Stability, °C change, max. | -1°C(-2°F) | |
| Compatibility: Sedimentation at 40°C, vol. % max. | 0 | |
| Corrosion weight change, mg/cm2, max.Aluminum | 0 | |
| Corrosion weight change, mg/cm2, max.Brass | 0.04 | |
| Corrosion weight change, mg/cm2, max.Cast Iron | 0 | |
| Corrosion weight change, mg/cm2, max.Copper | 0.05 | |
| Corrosion weight change, mg/cm2, max.Steel | 0 | |
| Corrosion weight change, mg/cm2, max. Tinned Iron | 0.00 | |
| Decrease in hardness of rubber cups at 70°C, IRHD, max. | 6 | |
| Equilibrium Reflex Boiling Point, °C (°F) min. | 255 (492) | |
| High Temp. Stability, °C change, max. | -1°C(-2°F) | |
| Increase in base diameter of rubber cup at 70°C, mm | 0.015 | |
| Kinematic Viscosity, at 100°C, cSt min. | 2.1 | |
| Kinematic Viscosity, at -40°C, cSt | 1189 | |
| Wet Equilibrium Reflex Boiling Point, °C (°F) min. | 151 (304) |
Container/Bulk Availability
| 12/12oz | Product Number - 00122 |
| 12/1 Quart | Product Number - 00120 |
| 3/1 Gallon | Product Number - 00121 |
| 5 Gallon Pail | Product Number - 00125 |
| 55 Gallon Drum | Product Number - 00128 |
Information accurate as of November 11, 2024